Login

Knowledge Base (4)

When it comes to knowing the ins and outs of your test equipment there is only one place to turn for a complete answer. We are always happy to help our customers understand their chambers and best uses for them. We want our customers to succeed in all that they do with our equipment.

Answers to the following questions:

  • Chamber trouble shooting
  • Controller use
  • Designing Profiles for performance
  • Chamber System Components
  • Calibration Procedures
  • Many More

 

System Description

The humidification systems provided with Hanse Environmental, Inc. chambers utilize the latest in ultrasonic nebulization principles to generate the moisture required in the chamber. The ultrasonic nozzle uses air and water under pressure. Atomized water leaving the nozzle is hit by the air reflected by the resonator as sound waves.  It is then nebulized into very small particles, like a fog, and rapidly absorbed by the air. The resonator is adjusted at the factory for maximum atomization and proper fog pattern. The fog pattern can be narrowed by moving the resonator further from the nozzle tip, and conversely, widened by moving the resonator closer to the tip.

The water used in the humidification system can be demineralized by the optional  D.I. bottle. In addition, a water quality light is included to monitor the quality of the water generated by the D.I. bottle. The D.I. bottles are a mixture of bed resin that contains positive and negative charged resins.  These resins remove the minerals from the water. The D.I. bottle supplied with the Hanse Chamber is a 1 cubic foot bottle.

Hanse View Updates

For our customers with HanseView,  you may now get your updates through our website.

We like to keep our customers running the most current version of HanseView. This will avoid any known problems that have already been resolved in new versions.

After you receve your login info, go to the downloads area and navigate to HanseView. Download the compressed file, execute, and update. Please read installation notes before updating, as features have been added that need configuration.

{quickdown:15}

{quickdown:16}

Halt ChamberIf you are looking for your user manuals and support documents for your chamber, look no further than our website!  We have been digitizing user manuals for both our chambers and their components. Below are a few links to them which can be found in our download section:

Read more to view all files currently available.

HanseView Remote Control

Overview

HanseView allow for remote control through text files. This can be done on local computer or via file sharing. Basic concept is that a command written to a text file is read by HanseView then executed and output placed to a text file.

This remote control capability allows for test stand integration. You can then use 1 of two models. Have test stand send set point commands or profile start stop commands to control chamber then read back current status. Other option is to have test stand read only status and react to conditions and time to perform necessary equipment test.

Go to top