Specification sheet · VS series (Vibration System)
VS-25 Vibration System
Standalone six-degree-of-freedom repetitive shock vibration system with a 60 × 60 in table, ready to run in its sound enclosure. The same table as the VTC-25 HALT/HASS chamber. Designed, built and supported in Allegan, Michigan.
- vibration table
- 60 × 60 in
- 6-DoF repetitive shock
- 10–10,000 Hz
- maximum vibration level
- 100 GRMS
- maximum load
- 500 lb
- compressed air
- 150 SCFM
Vibration
- Vibration
- Tri-axial 6-DoF repetitive shock, non-coherent broadband, 10–10,000 Hz
- Vibration level
- Up to 100 GRMS, unloaded table at 25–30 °C
- Energy distribution
- 90% of vibration energy in 10–4,000 Hz
- Repeatability
- ±1 GRMS within one minute of settling
- Vibration table
- 60 × 60 in (1,524 × 1,524 mm), ceramic-coated and insulated from its base
- Mounting inserts
- Stainless steel 3/8-16 or M10 over the full table surface, no restricted areas
- Maximum load
- 500 lb (227 kg)
- Vibrators
- Six medium and six large pneumatic vibrators, LubeMist™ lubricated with an adjustable ball valve and precision air regulator on each; SoftStart™ to minimize starting shock
- Accelerometer
- One Dytran 3030B5 with cable and three-axis mounting block
Enclosure
- Exterior (W × D × H)
- 66 × 66 × 32 in (1,676 × 1,676 × 813 mm), nominal
- Construction
- Insulated panels and floor with an acoustic lining; removable wall for service access
Utilities
- Electrical
- 110–220 V AC, single phase, 15 A outlet
- Compressed air
- 1.25 in NPT supply, 120 psig (8.3 bar), 150 SCFM, clean and dry
- Compressed air, Ultra-Hi option
- 300 SCFM (twice the pneumatic vibrators)
- Installation
- Unloading, rigging and utility connections are provided by the customer
Control and instrumentation
- Control
- Watlow controller with Hanse ChamberCore software, supplied with the system: programmable vibration ramps, GRMS level and test duration; can be synchronized with a chamber's temperature controller
- GRMS control
- From one accelerometer or the average of several, written straight to the Watlow controller for closed-loop control
- ChamberFFT (option)
- Vibration analysis on up to 16 IEPE accelerometer channels at 25,600 samples per second
Safety
- Interlock connection
- Shuts down vibration
- Emergency power off
- EPO shuts off system operation
Options
- Ultra-Hi vibration — twice the pneumatic vibrators, for higher vibration performance.
- More accelerometer channels — in groups of four, up to sixteen, with ChamberFFT.
- More accelerometers — Dytran 3030B5 with cable, and three-axis mounting blocks.
- Thermocouple inputs — 14 more product thermocouples, for 16 monitored and logged in ChamberCore.
- Fixtures — designed for your product, Metric or English layout.
- Enclosure top — manual or automatic opening, with ports or view windows.
- Chamber integration — the same table built into a VTC chamber, or supplied as a VK kit for a chamber you own.
Warranty and support
- 3-year warranty on vibrators and vibration tables.
- 1-year equipment warranty from shipment: parts and labor for the first 90 days, then parts at no cost other than travel.
- Supported for the long term — including controller retrofits for older systems.
- Built in Allegan, Michigan — designed, fabricated and supported in the US since 1993.